When does the walking wheel of a push forklift need to be replaced?

The walking wheel is made of polyurethane. The manual hydraulic forklift needs to carry a large weight during the transportation of heavy objects, and it is in direct contact with the complex ground. Therefore, its service life is short and it is a vulnerable part. So what happens to the trolley wheels that need to be replaced? Can't continue to use it? What caused the damage to the travel wheels of Diniu forklifts? This article will elaborate on it and hope it will be helpful to you.

The damage to the walking wheels of manual forklifts is mainly divided into the following situations:

1. Normal wear and tear of the traveling wheel; 2. Abnormal wear and tear of the traveling wheel; 3. Corrosive damage; 4. Crack damage caused by long-term overloading of the manual hydraulic forklift.

The walking wheels of manual forklifts must be replaced in the following situations:

1. The small travel wheel will be severely worn when used for a long time and high frequency of the forklift. Under normal wear conditions, observe the small travel wheel to see that the wear is more uniform. The diameter of the small travel wheel of the hydraulic forklift is away from the axis of the travel wheel. Equal size

2. If the ground cow is used for a long time with high frequency, the abnormal and severe wear of the small traveling wheel is shown as follows: the small traveling wheel of the hydraulic manual forklift has different diameters from the axis position, and there is severe wear in some locations, which is the main cause of this severe local wear. The reason is that during the transportation process of pushing the cattle, the walking ground is not flat or the operator does not pay attention to the changes of the ground obstacles, forcibly moving forward, manually raising the forklift's walking wheels, causing serious local bumps and injuries;

3. There is a strong corrosive solution in the operating environment of the Diniu forklift. In this case, even if the Diniu forklift is used for a short time, serious surface damage will occur;

4. In addition, the use environment of the cattle forklift can have a great impact on the ambient temperature of the small hand-push forklift. The operating environment temperature is too high or too low, which will cause premature damage to the wheels of the forklift. Because the high temperature or low temperature environment will destroy the molecular structure of the polyurethane material of the traveling wheel, thereby affecting the mechanical structure of the traveling wheel.

5. Long-term overloading of the forklift truck will cause premature damage to the wheels and cracks, commonly known as crushing.