Model and configuration options of manual forklifts

Manual of manual forklift:

1. The frame door must not be deformed or welded off. The rolling gap of the outer frame should be properly adjusted and should not be greater than 1.5mm. The rollers and shafts should be free from defects and defective wheel grooves with excess capacity. 10% of size.

2. The two lifting tensions should be uniform, not easy to be deformed, and the ends should be firm, and the pitch of the edges should not be extended by 4% of the original length, otherwise the sprocket should be worn.

3. The fork welding frame must not be severely deformed, whether the fork noodles have appetite or not, and the welding seam is open. The fork root angle is greater than 93 degrees, and the thickness must not be 90% of the natural original size. The height difference between the left and right fork tips shall not exceed 3% of the length of the forklift section. The fork positioning should be reliable, the fork fixing surface and positioning surface of the fork hook must not have obvious defects, the fork and the forklift frame must not be too large, and the movement should be smooth.

4. The connecting rope between the lifting cylinder and the mast should be firm, and the tilting oil should be firmly connected to the frame, and the fit gap should not be too large. The self-sinking amount of the door frame in l0min is not more than 20mm, and the inclination angle is not more than 0.5 degrees. The lifting speed is abnormal at the standard value when fully loaded.

5. The top guard and shield must be worn effectively.

6. People who stand up and down the fork, refuse to use a single fork to take goods that are higher than the vertical.

The choice of mobile phone and configuration generally starts from the following aspects:

1. The operating requirements of Chongqing manual forklifts include general requirements such as fatigue or cargo specifications, lifting height, working volume width, and gradeability. At the same time, operating efficiency (different operating efficiency is different) and operating habits (such as habit) riding Still standing driving) and other aspects.

2. Operating environment. If the company needs to move the goods or the warehouse environment has environmental protection requirements such as sanitation or tailing, it should be considered when selecting the warehouse and configuration. , Forklifts equipped with high-branch forklifts should also be cold-type configuration or location explosive type. Possible problems that the Kuche forklift needs to pass through during operation, such as whether the door affects the forklift when entering and exiting the warehouse; when entering and exiting the elevator, the elevator height and the effect of leaving the fork; when upstairs, whether the floor is in the vehicle to complete the work requirements, etc. Wait.

3. Operation function. The basic operation functions of forklifts are divided into horizontal handling, stacking, picking, loading, unloading, and picking. According to the job function achieved by the enterprise, it can be determined from the job function described above. Affect the specific configuration of the forklift, such as carrying paper rolls, molten iron, etc., the forklift needs to be installed with attachments to complete the function.