What should I pay attention to when using a manual forklift?

If the company needs to move goods or the warehouse environment has requirements for energy saving such as noise or exhaust emissions, if it is in a cold storage or in an environment with explosion-proof requirements, the configuration of Chongqing's manual forklift should also be cold storage or explosion-proof. Carefully examine the locations that the forklift needs to pass through, and consider possible problems, such as whether the door height affects the manual forklift when entering and exiting the warehouse; when entering and exiting the elevator, the elevator height and load capacity affect the manual forklift.

The second common oil pump failure of hydraulic manual forklift trucks: This type of damage is a more serious damage. It is recommended that after troubleshooting one of the failures, check whether there are problems with the following parts. 1. Due to the lack of lubricating oil in the oil cylinder, the piston rod or the oil cylinder is rusted. After the rust, the normal and smooth operation of the piston rod or the oil pump is affected, and the manual forklift operation is difficult. 2. Check whether the long-term overloading operation of the forklift affects the assembly gap between the parts. Hand-push hydraulic pallet trucks and ground cattle pallet trucks may cause insensitive operation. This kind of gap change mainly occurs in the position of easily slippery parts such as nuts. If this happens, it is recommended that you try to adjust the position of the nut.

Large supermarkets, logistics, freight, etc., have a lot of goods to be transported every day. Due to site conditions, manual forklift brands and ordinary mechanical loading and unloading equipment are not suitable. Manual forklifts have become their best choice for handling tools. The manual hydraulic handling forklift is a kind of manual handling tool with very simple operation. It is designed and applied based on the relevant theories of project engineering, allowing users to save more energy during operation, so it is very easy to use. Its handle can lift, move and unload goods flexibly. The appearance of the manual hydraulic pallet truck looks better than other manual pallet trucks, manual forklift manufacturers, and manual pallet trucks commonly used in logistics and freight.

The manual hydraulic lifting truck is a kind of manual hydraulic stacking equipment with no power and less pollution. The portable manual forklift is available from stock. It has the characteristics of balanced lifting, compact structure, flexible transportation, simple operation, and small turning radius. It is widely used in factories, Cargo handling and stacking in workshops, warehouses, stations, wharfs, etc. are more suitable for those sites with fire and explosion-proof requirements (such as printing workshops, oil depots, docks, warehouses, etc.).

The time required for maintenance of manual forklifts, because the maintenance interval of electric forklifts is much longer than that of internal combustion forklifts, and the time required for each maintenance is much less than that of internal combustion forklifts, which greatly saves the labor cost required for maintenance. In fact, what is more essential is that the downtime of the forklift is greatly shortened, so it is difficult to calculate the economic benefits brought about by the improved work efficiency of the forklift.