Manual pallet truck selection instructions

Different storage modes need to be equipped with different electric manual pallets, and the matching mode achieved will be very different in terms of first-in first-out or first-in-last-out, space utilization, operation efficiency, and investment cost. As a large-scale distribution center, the positioning is mainly for goods in and out of service. How to configure manual pallet trucks is very important to achieve the purpose and function.

Manual pallet truck tonnage configuration. Mainly include: 1.5T, 1.8T, 2T, 2.5T, 3T; the choice of the purchase configuration depends on the weight of the goods and the height of the highest fork. Because as the height increases, the safety of the manual pallet truck is gradually reduced. For example, a 5m high 2T battery manual pallet truck can fork to 2T when operating at a low position, but when the fork reaches a height of close to 5 meters, its safe weight may only be 800KG, or at most 1000KG. Exceeding this weight may cause danger due to overload. This is very important to know and understand.

The drive of a manual pallet truck. There are mainly battery manual pallet trucks and diesel hand pallet trucks; as it involves indoor and outdoor operations, two configuration ratios are considered. Relatively speaking, battery manual pallet trucks are much less powerful than diesel manual pallet trucks. However, the battery manual pallet truck has the advantages of environmental protection, low noise, small turning radius and low operating cost. Diesel manual pallet trucks have the advantages of high power, high speed and high efficiency.

The lifting height of the manual pallet truck. Taking into account the needs of warehouse elevated operations, combined with the height of the warehouse, the lifting height of the manual pallet truck from the standard configuration of 3.5 meters, 4.5 meters, 5.5 meters, and 6 meters should be properly considered; usually several types are considered separately according to low-level operations and high-level operations Collocation in order to reduce the total procurement cost.

The height of the manual pallet truck. Considering that the manual pallet truck must enter the container to work, the height of the manual pallet truck door frame is also considered. The clear height in the container is 2.3 meters or less, and at least two gantry sections are required; but the lifting height of the manual pallet truck and the door frame height There will be conflicts, and the lift is too high. Whether it is a three-section or two-section gantry, the height of the gantry is 2.4 meters, so it is impossible to have both.