Practical methods for purchasing truck tail plates

There are many brands and models of truck tailboards, and the quality and prices on the market vary. For ordinary consumers, it is difficult for ordinary consumers to choose a tailboard with high quality and low price suitable for their own enterprises. Next, Niuli Machinery will talk about how to choose the tail plate.

First of all, we must understand the model of the tailgate vehicle, the size of the car and the type of tailgate. There are three types of tailboards: cantilever type, vertical type and folding type. After selecting the type, it depends on the parameters. The three more important parameters of the car tailgate are load, panel size, and load center. The details are as follows:

1. Load:

Choose the load parameters of the car tail plate, which tends to be larger than the actual cargo weight. For example, if the cargo weighs 1.1 tons, you must choose 1.5 tons instead of 1.5 tons. Although it can be used, it will increase the pressure on the tail plate cylinder. . The load of the tailgate of a car is generally 1.2 times the rated load. When your budget is limited and you will not work over the rated load for a long time, you can choose a model equal to or less than the weight of the cargo. If the cargo is 1.3 tons, a 1.5-ton model can be used. Easy to be big, not small.

2. Load center:

What we call the rated load refers to the weight within the load center. When the center of gravity of the cargo is outside the load center, the load will drop, and the rated load cannot be raised. The load center of the tailgate of the car is 600mm from the root of the tailgate panel. Only in this and the center can the tailgate be loaded. Tonnage, so when loading and unloading cargo, place it as close to the root of the panel as possible without overloading.

3. Panel width selection:

It matches well with the outer width of the car, easy to be small but not easy to be big, between 10mm. The length of the tailboard is generally longer than the length of the cargo or pallet, and it cannot be shorter than the length of the cargo or pallet by 100mm, otherwise it will slip off the cargo space. Now the tailboard manufacturers generally have a standard length of 1.8 meters. If you need to lengthen it, you can customize it.

To

Secondly, the quality and price of tailboards in the market are uneven. Niuli Machinery recommends to determine the brand first, then select the type and parameters, and then choose the right price. Of course, after-sales service is also an important reference information.