How should the truck tailgate be maintained?

Truck tailboard is also called car lifting tailboard, car loading and unloading tailboard, lifting tailboard, hydraulic car tailboard. Car tailboard is a kind of loading and unloading logistics auxiliary equipment. Simply put, it is a lifting platform installed at the back of the truck. According to the principle of electronic control hydraulic pressure, the support frame can move back and forth to achieve the effect of take-off and landing. Of course, our users generally can use the button facility to control the take-off and landing of the tailgate, which is very convenient for loading and unloading goods. Hydraulic tailboards have also been used in the automotive tailboard industry for some time. I found that many users do not do well in car tailboard maintenance. Today, I will share the experience of car tailboard maintenance with everyone.

1. The tools and materials used for car external maintenance are relatively common. General grease, grease dispenser, and hydraulic oil are enough, and there are no special requirements. But maintaining the tailgate of a truck is a meticulous job. Let me take the common Dongguan car tail plate as an example to tell you about the maintenance of the butter nozzle of the car tail plate; the butter nozzle is generally located at the mechanical joint. Whether the mechanical joint rotation effect is good or not is the key to the butter requirement, so everyone should pay attention to the tail plate For maintenance, apply the butter once after about 1-3 months of use. Generally, there are 7 grease nipple on the left and 7 grease nipple on the right. Pay attention to the grease when using the grease gun.

2. The other side is the maintenance of the tail plate cylinder. The tail plate generally has 5 cylinders. The hydraulic oil in the cylinder has been used for a long time and needs to be released. Better clean hydraulic oil. This is relatively simple. It is worth noting that it is hydraulic. The oil must always be of the same quality, because hydraulic oils of different qualities will cause condensation during use, which will not only fail to provide lubrication and pressurization, but will also cause component failures, resulting in unnecessary losses. It is worth noting that when the hydraulic oil is insufficient, it will show failures such as not rising to a reasonable position. At this time, you can consider whether the hydraulic oil is insufficient. You can consult the car tail plate manufacturer first. If the hydraulic oil is insufficient, you can add the hydraulic oil yourself. That's it.

3. Maintenance of the surface of the tailgate of a car is also very important. Because of the working nature of the tailgate, its surface is often exposed to the open air, especially when it rains, which will make it rusty. More corrosive debris may cause corrosion to it. You should always pay attention to cleaning to keep the board clean. If possible, you can apply protective coatings from time to time. Of course, normal cleaning can be done with ordinary rags. Frequent maintenance of the tailgate will not only extend the service life, but also make your car's tailboard look brighter.

The maintenance of any mechanical equipment is a meticulous work and must not be sloppy; usually gentle work is not required to be rough; always pay attention to prevent collisions to avoid deformation of the tail plate, resulting in bad conditions such as the tail plate not closing. If you encounter a problem that is difficult to solve by yourself, you should promptly find a relevant professional for on-site service.